Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Durabio™ D7340 - PC - Mitsubishi Chemical Performance Polymers

Material Data Center offers the following functions for Durabio™ D7340:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Durabio datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 8 cm³/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Indice de fluidité, MFI 10 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2700 MPa ISO 527
Résistance à la traction 79 MPa ISO 527
Déformation à la rupture 72 % ISO 527
Module de flexion, 23°C 2700 MPa ISO 178
Résistance à la flexion 116 MPa ISO 178
Résistance au choc Charpy, +23°C N kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 7 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 102 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 114 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 69 E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 69 E-6/K ISO 11359-1/-2
Propriétés optiquesValeurUnitéNorme du test
ISO Data
Transmittance 92 % ISO 13468-1, -2
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1360 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 90 - 100 °C -
Pré-séchage - temps 5 - 7 h -
Température de la matière fondue 230 - 250 °C -
Température du moule 60 - 80 °C -
Température - Zone d'alimentation 220 - 260 °C -
Zone 1 220 - 260 °C -
Température de la buse 220 - 260 °C -
Vitesse de rotation de vis 50 rpm -
Pressions d'injection 50 - 95 MPa -
Contre-pression 10 MPa -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Noir
Propriétés spéciales
Stabilisé à la chaleur, Transparent
Caractéristiques
Light Guiding
Certifications
Contient des ressources renouvelables
Applications
Automobile, Électrotechnique et électrique, Emballage, Sport
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.