Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ferrex GPP20CF69UL-WH - PP-K20 - LyondellBasell Industries

Material Data Center offers the following functions for Ferrex GPP20CF69UL-WH:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ferrex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 20 g/10min ASTM D 1238
Température 230 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité 30.3 MPa ASTM D 638
Allongement à la rupture 55 % ASTM D 638
Module de flexion 1689 MPa ASTM D 790
Dureté D Shore 73 - ASTM D 2240
Gardner au choc 14.7 J ASTM D 2794,4226,5420
Izod choc avec entaille, 1/8 in 36.3 J/m ASTM D 256
Résistance au choc Izod, 1/8 in 1170 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité HB - UL 94
DTUL à 66 psi 105 °C ASTM D 648
DTUL à 264 psi 57.8 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Densité 1070 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 93.3 °C -
Pré-séchage - temps 2 - 3 h -
Température du moule 46.1 - 60 °C -
Zone 1 199 - 204 °C -
Zone 2 204 - 210 °C -
Zone 3 210 - 216 °C -
Température de la buse 216 - 221 °C -
Vitesse de rotation de vis 100 - 150 rpm -
Contre-pression 0.138 - 0.345 MPa -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Blanc
Caractéristiques
High Gloss, Homopolymère
Disponibilité régionale
Amérique du nord, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.