Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hiflex CA 7800 A - TPO - LyondellBasell Industries

Material Data Center offers the following functions for Hiflex CA 7800 A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hiflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 1.2 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte d'écoulement 8.7 MPa ISO 527
Déformation au seuil d'écoulement 35 % ISO 527
Contrainte à la rupture 11 MPa ISO 527
Déformation à la rupture 450 % ISO 527
Module de flexion, 23°C 210 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C N kJ/m² ISO 179/1eA
Dureté Shore D 35 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 161 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 0.45 MPa 40 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 85 °C ISO 306
Propriétés diversesValeurUnitéNorme du test
Masse volumique 880 kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection, Extrusion de cable, Extrusion (autres)
Conditionnement
Granulés, Couleurs naturelles
Propriétés spéciales
Modifié choc
Caractéristiques
Mélange de résine, Résistant aux rayures, Soft Feel
Applications
Automobile, Construction, Électrotechnique et électrique
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.