Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOSTAFORM® MT®24F01 - POM - Celanese

Check here, which other Hostaform datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	21	cm³/10min	ISO 1133
Température	190	°C	-
Charge	2.16	kg	-

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	2600	MPa	ISO 527
Contrainte d'écoulement	58	MPa	ISO 527
Déformation au seuil d'écoulement	8	%	ISO 527
Déformation nominale à la rupture	25	%	ISO 527
Résistance au choc Charpy, +23°C	80	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	4	kJ/m²	ISO 179/1eA

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa	100	°C	ISO 75-1/-2

Propriétés diverses	Valeur	Unité	Norme du test
Masse volumique	1440	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection

Conditionnement

Granulés

Additifs

Lubrifiant, Agent de démoulage

Propriétés spéciales

Stérilisable, Stérilisation par oxyde d'éthylène (EtO), Stérilisation à la vapeur

Caractéristiques

Copolymère

Certifications

Contact alimentaire, Approbation pour contact alimentaire BfR, FDA 21 CFR approbation, Grade médical, Biocompatibility ISO 10993, USP Class VI approbation, Drug Master File, Device Master File

Applications

Médical

Disponibilité régionale

Amérique du nord, Europe, South and Central America, Proche-Orient/Afrique

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.