Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen GM 9310 C BLACK - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen GM 9310 C BLACK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 4.5 g/10min ISO 1133
Température 190 °C -
Charge 21.6 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1250 MPa ISO 527
Contrainte d'écoulement 26 MPa ISO 527
Déformation au seuil d'écoulement 7 % ISO 527
Module de fluage en traction, 1h 780 MPa ISO 899-1
Résistance au choc Charpy (entaillé), +23°C 5 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 3 kJ/m² ISO 179/1eA
Ball indentation hardness 55 MPa ISO 2039-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, B 83 °C ISO 306
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité transversale 100000 Ohm*m IEC 62631-3-1
Résistivité superficielle 10000 Ohm IEC 62631-3-2
ASTM Data
Résistance de la surface 10000 Ohm ASTM D 257
Résistance volumique 100000 Ohm*cm ASTM D 257
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1000 kg/m³ ISO 1183
Caractéristiques
Transformation
Extrusion de tubes, Extrusion de plaques, Extrusion (autres)
Conditionnement
Noir
Propriétés spéciales
Conductivité électrique accrue
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.