Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen PP H1022 12 - PP - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen PP H1022 12:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 0.3 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte d'écoulement 31 MPa ISO 527
Déformation au seuil d'écoulement 12 % ISO 527
Résistance au choc Charpy (entaillé), +23°C 117 kJ/m² ISO 179/1eA
Ball indentation hardness 50 MPa ISO 2039-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 164 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 0.45 MPa 91 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 158 °C ISO 306
Température de ramolliss. Vicat, B 75 °C ISO 306
Propriétés diversesValeurUnitéNorme du test
Masse volumique 908 kg/m³ ISO 1183
Caractéristiques
Transformation
Extrusion de tubes, Extrusion de plaques, Extrusion (autres)
Conditionnement
Noir
Propriétés spéciales
Modifié choc
Caractéristiques
Copolymère, Copolymère choc
Résistance Chimique
Résistance à oxydation
Certifications
Contact alimentaire, Approuvé pour le contact alimentaire suivant 1935/2004/CE, Approuvé pour le contact alimentaire suivant 10/2011
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.