Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1033TL - PA66-GF33 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1033TL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0.5 / * % ISO 294-4, 2577
ASTM Data
Retrait au moulage , parallèle 0.004 mm/mm ASTM D 955
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Contrainte d'écoulement 126 / - MPa ISO 527
Déformation à la rupture 2.8 / - % ISO 527
Module de flexion, 23°C 7300 / - MPa ISO 178
Résistance au choc Izod avec entaille, +23°C 14 / - kJ/m² ISO 180/1A
ASTM Data
Module de traction d’élasticité 128 / 103 MPa ASTM D 638
Allongement à la rupture 2.5 / - % ASTM D 638
Module de flexion 6890 / 4480 MPa ASTM D 790
Résistance à la flexion 200 / 159 MPa ASTM D 790
Dureté Rockwell M 93 / M 83 - ASTM D 785
Izod choc avec entaille, 1/8 in 150 / 140 J/m ASTM D 256
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 238 / * °C ISO 75-1/-2
ASTM Data
UL 94 inflammabilité HB - UL 94
Épaisseur testée 1.5 mm -
coefficient de dilatation thermique, long. 29 E-6/K ASTM D 696
DTUL à 264 psi 241 °C ASTM D 648
Propriétés électriquessec / condUnitéNorme du test
ASTM Data
Rigidité diélectrique, peu de temps 22 / - kV/mm ASTM D 149
Résistance volumique 1E15 / - Ohm*cm ASTM D 257
Propriétés diversessec / condUnitéNorme du test
Masse volumique 1340 / - kg/m³ ISO 1183
Absorption d’eau, 24hr 0.5 % ASTM D 570
Densité 1340 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés
Additifs
Lubrifiant
Disponibilité régionale
Amérique du nord
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.