Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LATICONTHER 62 GR/50 - PA6-CD - LATI Industria Termoplastici S.p.A.

Material Data Center offers the following functions for LATICONTHER 62 GR/50:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Laticonther datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0.5 % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 0.5 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 11500 MPa ISO 527
Contrainte à la rupture 60 MPa ISO 527
Déformation à la rupture 1.2 % ISO 527
Résistance au choc Charpy, +23°C 8 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 3.5 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 195 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 205 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 195 °C ISO 306
Coeffic. de dilatation therm. linéique, parallèle 30 E-6/K ISO 11359-1/-2
ASTM Data
UL 94 inflammabilité HB - UL 94
Épaisseur testée 0.75 mm -
Other Standards[S]
Conductivité thermique, l'état solide 1.44 W/(m K) ASTM E 1461-92
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Résistance de la surface 10000 Ohm ASTM D 257
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1500 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 90 - 100 °C -
Pré-séchage - temps 3 h -
Température de la matière fondue 250 - 290 °C -
Température du moule 80 - 100 °C -
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Thermoconducteur
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.