Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUMID GP3400A(W) - PA6-MF40 - LG Chem

Material Data Center offers the following functions for LUMID GP3400A(W):
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lumid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Retrait au moulage , parallèle 0.006 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Résistance de traction à la rupture 83.4 MPa ASTM D 638
Allongement à la rupture 3 % ASTM D 638
Module de flexion 6867 MPa ASTM D 790
Résistance à la flexion 128 MPa ASTM D 790
Dureté Rockwell R 121 - ASTM D 785
Izod choc avec entaille, 1/8 in 66 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité HB - UL 94
Épaisseur testée 0.75 mm -
coefficient de dilatation thermique, long. 51 E-6/K ASTM D 696
DTUL à 66 psi 210 °C ASTM D 648
DTUL à 264 psi 180 °C ASTM D 648
Température de fusion 220 °C ASTM D 3418
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Rigidité diélectrique, peu de temps 22 kV/mm ASTM D 149
Constante diélectrique, 1 MHz 4 - ASTM D 150
Résistance volumique 1E17 Ohm*cm ASTM D 257
Résistance à l’arc 185 s ASTM D 495
Propriétés diversesValeurUnitéNorme du test
Absorption d’eau, 24hr 1 % ASTM D 570
Densité 1490 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 - 100 °C -
Pré-séchage - temps 4 - 5 h -
Température de la matière fondue 260 - 280 °C -
Température du moule 60 - 80 °C -
Zone 1 250 - 270 °C -
Zone 2 255 - 275 °C -
Zone 3 255 - 275 °C -
Température de la buse 260 - 280 °C -
Caractéristiques
Transformation
Moulage par injection
Applications
Électrotechnique et électrique, General Purpose
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.