Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luminy® LX930 - PLA - TotalEnergies Corbion

Material Data Center offers the following functions for Luminy® LX930:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luminy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 18 g/10min ISO 1133
Température 210 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 3500 MPa ISO 527
Résistance à la traction 40 MPa ISO 527
Déformation à la rupture 5 % ISO 527
Résistance au choc Charpy (entaillé), +23°C 5 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 130 °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 60 °C ISO 11357-1/-2
Température de fléchissement s/chrg, 0.45 MPa 60 °C ISO 75-1/-2
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1240 kg/m³ ISO 1183
Biobased content 100 % -
Moisture Content 0.04 % -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 40 °C -
Pré-séchage - temps 24 h -
Température de la matière fondue 220 - 240 °C -
Caractéristiques
Transformation
Extrusion (autres)
Conditionnement
Granulés
Caractéristiques
Amorphe
Certifications
Contient des ressources renouvelables, Contact alimentaire, Approuvé pour le contact alimentaire suivant 10/2011, Food contact notification (FCN), Compostable ISO 13432 (producteur), Compostable ISO 13432 (certificat)
Disponibilité régionale
Amérique du nord, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.