Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MAGNUM™ 3404 - ABS - Trinseo

Material Data Center offers the following functions for MAGNUM™ 3404:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Magnum datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 6.7 cm³/10min ISO 1133
Température 220 °C -
Charge 10 kg -
Indice de fluidité, MFI 6.6 g/10min ISO 1133
Température 220 °C -
Charge 10 kg -
Retrait au moulage, parallèle 0.6 % ISO 294-4, 2577
ASTM Data
Indice de fluidité, MFI 1.9 g/10min ASTM D 1238
Température 220 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2150 MPa ISO 527
Contrainte d'écoulement 43 MPa ISO 527
Déformation au seuil d'écoulement 2.7 % ISO 527
Module de flexion, 23°C 2100 MPa ISO 178
Résistance à la flexion 70 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 18 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 13 kJ/m² ISO 179/1eA
Résistance au choc Izod avec entaille, +23°C 19 kJ/m² ISO 180/1A
Résistance au choc Izod avec entaille 11 kJ/m² ISO 180/1A
Température -30 °C -
ASTM Data
Module en traction 2100 MPa ASTM D 638
Module de traction d’élasticité 46 MPa ASTM D 638
Allongement d’élasticité 4.1 % ASTM D 638
Module de flexion 2520 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 230 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 101[ann.] °C ISO 75-1/-2
Température de ramolliss. Vicat, B 102 °C ISO 306
Inflammabilité ep. nom. 1.5 mm HB class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Epaisseur de l'éprouvette 3.0 mm -
ASTM Data
Vicat température 102 °C ASTM D 1525
ann.: annealed
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1050 kg/m³ ISO 1183
Densité 1050 kg/m³ ASTM D 792
Caractéristiques
Transformation
Extrusion de plaques, Extrusion (autres), Thermoformage
Certifications
Contact alimentaire, FDA 21 CFR approbation
Applications
General Purpose
Disponibilité régionale
Amérique du nord, Europe, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.