Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® Rnew® 63R53 SP 01 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Polyether block Pebax® Rnew® 63R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant.

The percentage of renewable carbon measured according to ASTM D6866 is 77%.




Main applications:

• Ski shoes
• Athletic foot wear components

Packaging:
This grade is delivered dried in sealed packaging (20 and 25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	- / 245	MPa	ISO 527
Contrainte d'écoulement	- / 19	MPa	ISO 527
Déformation au seuil d'écoulement	- / 40	%	ISO 527
Déformation nominale à la rupture	- / >50	%	ISO 527
Résistance au choc Charpy (entaillé), -30°C	- / 22	kJ/m²	ISO 179/1eA
Contrainte à la rupture TPE	51 / *	MPa	ISO 527
Déformation à la rupture TPE	>300 / *	%	ISO 527
Dureté Shore D	56 / *	-	ISO 7619-1

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	180 / *	°C	ISO 11357-1/-3

Propriétés diverses	sec / cond	Unité	Norme du test
Absorption d'eau	1.5 / *	%	Sim. to ISO 62
Absorption d'humidité	0.8 / *	%	Sim. to ISO 62
Masse volumique	1030 / 1030	kg/m³	ISO 1183
Biobased content	77	%	-

Fonctions

Caractéristiques

Transformation

Moulage par injection, Extrusion de films, Extrusion de profilés, Extrusion (autres), Moulage par transfert, Coulage, Thermoformage

Conditionnement

Granulés

Propriétés spéciales

Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur

Certifications

Contient des ressources renouvelables

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 260°C / 290°C
- Typical mold temperature : 25 – 60°C
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 65-75°C

Extrusion (autres)

Processing conditions:

- Typical melt temperature (Min / Recommended / Max): 210°C / 225°C / 240°C
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-8 hours at 65-75°C

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.