Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Platamid® H 2528 Powder - PA* - ARKEMA
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Platamid datasheets, application examples or technical articles are available in Material Data Center
Copolyamide Hot Melt Adhesive / Textile Applications
Platamid® H 2528 Powder is a medium melt viscosity copolyamide adhesive powder for the production of fusible interlinings.
Platamid® H 2528 Powder offers excellent laundry resistance up to 60°C and an excellent steam resistance at moderate fusing conditions.
AVAILABLE GRADES
This grade is available in different grain sizes:
- Platamid® H 2528 PA80 (0-80 µm paste dot)
- Platamid® H 2528 PTA 120 (0-120 µm power dot)
- Platamid® H 2528 PTA 170/20 (0-170 µm power dot)
- Platamid® H 2528 PTA 170 (80-170 µm double dot)
PACKAGINGSHELF LIFE
Two years from the date of delivery. For any use above this limit, please refer to our technical services.
Caractéristiques des transformations/physiques | sec / cond | Unité | Norme du test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Indice de fluidité à chaud en volume, MVR | 44 / * | cm³/10min | ISO 1133 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Température | 160 / * | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Charge | 2.16 / * | kg | - |
Propriétés thermiques | sec / cond | Unité | Norme du test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Température de fusion, 10°C/min | 128 / * | °C | ISO 11357-1/-3 |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.