Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AESN BLACK P202 CTL - PA12-I-CD - ARKEMA

Material Data Center offers the following functions for Rilsamid® AESN BLACK P202 CTL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
ISO 16396 - PA12, EGHLZ, C22-005

Rilsamid® AESN BLACK P202 CTL resin is a plasticized conductive grade designed for tube extrusion.

Rilsamid® AESN BLACK P202 CTL resin is specially designed for conductive multi-layers fuel line applications.


Main applications:

Conductive layer for fuel line applications. 

Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. for any use above this limit, please refer to our technical services.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 1.2 / * cm³/10min ISO 1133
Température 235 / * °C -
Charge 5 / * kg -
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction - / 585 MPa ISO 527
Contrainte d'écoulement - / 35 MPa ISO 527
Déformation au seuil d'écoulement - / 26 % ISO 527
Déformation nominale à la rupture - / >50 % ISO 527
Résistance au choc Charpy (entaillé), +23°C - / 82 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C - / 4 kJ/m² ISO 179/1eA
Dureté Shore D 65 / * - ISO 7619-1
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 174 / * °C ISO 11357-1/-3
Propriétés diversessec / condUnitéNorme du test
Masse volumique 1140 / - kg/m³ ISO 1183
Caractéristiques
Transformation
Extrusion de profilés, Extrusion (autres)
Conditionnement
Granulés, Noir
Additifs
Plastifiant
Propriétés spéciales
Conductivité électrique accrue, Antistatique, Modifié choc, Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Autres informations
Extrusion (autres)

Processing conditions for extrusion :

- Typical melt temperature (Min / Recommended / Max) : 230°C / 240°C / 270°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80°C.
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.