Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® BMNO MED - PA11 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses

Any use of this information falls under the rules of our disclaimer.

Informations produit

PA11, MHL, 12-010
Rilsan® BMNO MED resin is a polyamide 11 produced from a renewable source. This natural grade dedicated to injection offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
 
Upon request letters regarding USP Class VI compliance can be provided.




Main applications:

• Medical molded components such as needle fittings for syringes
• Minimally invasive devices

Packaging:
This grade is delivered dried in sealed packaging (44 lb bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Caractéristiques des transformations/physiques	sec / cond	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	30 / *	cm³/10min	ISO 1133
Température	235 / *	°C	-
Charge	2.16 / *	kg	-
Retrait au moulage, parallèle	1.1 / *	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	0.9 / *	%	ISO 294-4, 2577

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	- / 1280	MPa	ISO 527
Contrainte d'écoulement	- / 41	MPa	ISO 527
Déformation au seuil d'écoulement	- / 5	%	ISO 527
Déformation nominale à la rupture	- / >50	%	ISO 527
Résistance au choc Charpy (entaillé), +23°C	- / 8.3	kJ/m²	ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C	- / 10.5	kJ/m²	ISO 179/1eA
Dureté Shore D	68 / *	-	ISO 7619-1

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	189 / *	°C	ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa	50 / *	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa	145 / *	°C	ISO 75-1/-2

Propriétés diverses	sec / cond	Unité	Norme du test
Masse volumique	1030 / 1030	kg/m³	ISO 1183
Biobased content	100	%	-

Caractéristiques

Transformation

Moulage par injection

Conditionnement

Granulés

Certifications

Contient des ressources renouvelables, Grade médical, USP Class VI approbation

Applications

Médical

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 240°C / 270°C / 290°C.
- Mold temperature : 25 - 60°C

- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.

Résistance Chimique

Acides
	Acide acétique (masse en 5%) (23°C)
	Acide citrique (masse en 10%) (23°C)

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.