Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Starflam PZ0052E - PA6-GF - Eurostar Engineering Plastics

Material Data Center offers the following functions for Starflam PZ0052E:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Starflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 6100 MPa ISO 527
Contrainte à la rupture 82 MPa ISO 527
Déformation à la rupture 2.5 % ISO 527
Module de flexion, 23°C 5200 MPa ISO 178
Résistance au choc Izod, +23°C 25 kJ/m² ISO 180/1U
Résistance au choc Izod avec entaille, +23°C 3 kJ/m² ISO 180/1A
ASTM Data
Module en traction 7440 MPa ASTM D 638
Résistance de traction à la rupture 103 MPa ASTM D 638
Allongement à la rupture 2.3 % ASTM D 638
Module de flexion 7100 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 53 J/m ASTM D 256
Résistance au choc Izod, 1/8 in 469 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 137 °C ISO 75-1/-2
Aptitude à l'allumage 20 % ISO 4589-1/-2
ASTM Data
UL 94 inflammabilité V-2 - UL 94
Épaisseur testée 0.75 mm -
coefficient de dilatation thermique, long. 32 E-6/K ASTM D 696
DTUL à 66 psi 215 °C ASTM D 648
DTUL à 264 psi 204 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1380 kg/m³ ISO 1183
Absorption d’eau, 24hr 1.05 % ASTM D 570
Densité 1380 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection, Extrusion (autres)
Conditionnement
Granulés
Propriétés spéciales
Ignifugé
Caractéristiques
Faible odeur
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.