Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styroflex® 4G80 - SB - INEOS Styrolution

Material Data Center offers the following functions for Styroflex® 4G80:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styroflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 18 cm³/10min ISO 1133
Température 200 °C -
Charge 5 kg -
ASTM Data
Indice de fluidité, MFI 76 g/10min ASTM D 1238
Température 220 °C -
Charge 10 kg -
Retrait au moulage , parallèle 0.006 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 50 MPa ISO 527
Déformation à la rupture 500 % ISO 527
Résistance au choc Charpy (entaillé), +23°C 80 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 80 kJ/m² ISO 179/1eA
Dureté Shore A 80 - ISO 7619-1
Dureté Shore D 28 - ISO 7619-1
ASTM Data
Module en traction 68.95 MPa ASTM D 638
Module de traction d’élasticité 2.41 MPa ASTM D 638
Allongement à la rupture 500 % ASTM D 638
Dureté A Shore 80 - ASTM D 2240
Dureté D Shore 28 - ASTM D 2240
Izod choc avec entaille, 1/8 in 747 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, A 38 °C ISO 306
ASTM Data
Vicat température 39.4 °C ASTM D 1525
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 18 % ASTM D 1003
Lumière á Transmittance 81 % ASTM D 1003
Indice de réfraction 1.56 - ASTM D 542
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.07 % Sim. to ISO 62
Absorption d'humidité 0.07 % Sim. to ISO 62
Masse volumique 980 kg/m³ ISO 1183
Densité 980 kg/m³ ASTM D 792
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Température de la matière fondue 170 - 240 °C -
Température du moule 29.4 - 43.3 °C -
Caractéristiques
Transformation
Extrusion (autres)
Conditionnement
Granulés
Propriétés spéciales
Transparent
Caractéristiques
Soft Feel, Copolymère
Applications
Médical, Sport
Disponibilité régionale
Amérique du nord, Europe, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.