Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TIPELIN 7100S - (PE-HD) - MOL Petrochemicals Co. Ltd.

Material Data Center offers the following functions for TIPELIN 7100S:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tipelin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 0.12 g/10min ISO 1133
Température 190 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte d'écoulement 27 MPa ISO 527
Déformation au seuil d'écoulement 12 % ISO 527
Contrainte à la rupture 28 MPa ISO 527
Déformation à la rupture 1500 % ISO 527
Module de flexion, 23°C 1100 MPa ISO 178
Résistance au choc Izod avec entaille, +23°C 15 kJ/m² ISO 180/1A
Dureté Shore D 63 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, A 126 °C ISO 306
Propriétés diversesValeurUnitéNorme du test
Masse volumique 949 kg/m³ ISO 1183
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Température de la matière fondue 190 - 210 °C -
Caractéristiques
Transformation
Extrusion de tubes, Extrusion de plaques, Soufflage
Conditionnement
Granulés
Caractéristiques
Copolymère, Butène copolymère
Résistance Chimique
Résistance aux acides, Fissuration à l’environnement, Résistance à oxydation
Certifications
Contact alimentaire, Approuvé pour le contact alimentaire suivant 1935/2004/CE, Approuvé pour le contact alimentaire suivant 10/2011, FDA 21 CFR approbation, Contact avec l'eau potable, Contact avec l'eau potable KTW, RoHS
Applications
Électrotechnique et électrique, Emballage, Jouets
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.