Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrasint™ TPU 88A - TPU - BASF

Material Data Center offers the following functions for Ultrasint™ TPU 88A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrasint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - 3D Data
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Dureté Shore A 89 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 135 °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min -48 °C ISO 11357-1/-2
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1100 kg/m³ ISO 1183
Bulk density 500 kg/m³ -
3D DataValeurUnitéNorme du test
Other Standards[S]
Module en traction, flat 75 MPa ISO 527
Module en traction, upright 75 MPa ISO 527
Résistance à la traction, flat 8 MPa ISO 527
Résistance à la traction, upright 7 MPa ISO 527
Déformation à la rupture, flat 270 % ISO 527
Déformation à la rupture, upright 130 % ISO 527
Module de flexion, flat 70 MPa ISO 178
Module de flexion, upright 70 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C, flat 0 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), +23°C, upright 0 kJ/m² ISO 179/1eA
Température de ramolliss. Vicat, A, flat 98 °C ISO 306
Température de ramolliss. Vicat, A, upright 98 °C ISO 306
S: These properties are reported by the producer according standards that are different to our defaults.
Caractéristiques
Transformation
Additive Manufacturing, Frittage laser
Conditionnement
Poudre, Blanc
Propriétés spéciales
Stabilisé aux intempéries
Résistance Chimique
Stabilité hydrolytique
Applications
Sport
Disponibilité régionale
Amérique du nord, Europe, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.