Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® A28 - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® A28:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
Vydyne A28 is an unreinforced, PA66 for injection molded applications.
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 3000 / - MPa ISO 527
Contrainte d'écoulement 85 / - MPa ISO 527
Déformation au seuil d'écoulement 3.8 / - % ISO 527
Résistance au choc Charpy, +23°C 270 / - kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 100 / - kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 5 / - kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 3 / - kJ/m² ISO 179/1eA
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Coeffic. de dilatation therm. linéique, parallèle 80 / * E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 80 / * E-6/K ISO 11359-1/-2
Aptitude à l'allumage 26 / * % ISO 4589-1/-2
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Résistivité transversale >1E13 / - Ohm*m IEC 62631-3-1
Propriétés diversessec / condUnitéNorme du test
Absorption d'humidité 2 / * % Sim. to ISO 62
Masse volumique 1140 / - kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés
Additifs
Agent de démoulage
Propriétés spéciales
Stabilisé à la chaleur
Disponibilité régionale
Amérique du nord, Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.