Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Zedex® ZX-100EL55 - PET... - Wolf Kunststoff-Gleitlager GmbH

Material Data Center offers the following functions for Zedex® ZX-100EL55:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Zedex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
For more detailed information, please read our
or contact our representatives in your region.
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 200 MPa ISO 527
Résistance à la traction 37 MPa ISO 527
Contrainte d'écoulement 14 MPa ISO 527
Déformation au seuil d'écoulement 20 % ISO 527
Contrainte à la rupture 30 MPa ISO 527
Déformation à la rupture >50 % ISO 527
Module de flexion, 23°C 350 MPa ISO 178
Résistance au choc Charpy, +23°C N kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C N kJ/m² ISO 179/1eA
Ball indentation hardness 49 MPa ISO 2039-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 110 °C ISO 75-1/-2
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Epaisseur de l'éprouvette 3.2 mm -
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité transversale 2E12 Ohm*m IEC 62631-3-1
Résistivité superficielle 4E12 Ohm IEC 62631-3-2
Rigidité diélectrique 21 kV/mm IEC 60243-1
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.2 % Sim. to ISO 62
Masse volumique 1200 kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Grains, Noir
Propriétés spéciales
Stabilisé aux intempéries
Caractéristiques
Soft Feel
Résistance Chimique
Résistance chimique générale
Certifications
Contact alimentaire, FDA 21 CFR approbation, Contact avec l'eau potable
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.