Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Adsyl 6 C 30 F - PP - LyondellBasell Industries

Material Data Center offers the following functions for Adsyl 6 C 30 F:
unit conversion, PDF datasheet print

Check here, which other Adsyl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film)
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 5.5 g/10min ISO 1133
Temperatura 230 °C -
Carico 2.16 kg -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 128 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 0.45 MPa 59 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 103 °C ISO 306
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Brillantezza 92 - ASTM D 2457
Opacità 0.2 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Massa volumica 900 kg/m³ ISO 1183
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Modulo a trazione, parallelo 260 MPa ISO 527-3
Modulo a trazione, perpend. 250 MPa ISO 527-3
Carico allo snervamento, parallelo 14 MPa ISO 527-3
Carico allo snervamento, normal 14 MPa ISO 527-3
Allungamento allo snervamento, parallelo 16 % ISO 527-3
Allungamento allo snervamento, perpend. 14 % ISO 527-3
Carico unitario a rottura, parallelo 37 MPa ISO 527-3
Carico unitario a rottura, perpend. 41 MPa ISO 527-3
Allungamento massimo, parallelo 850 % ISO 527-3
Allungamento massimo, perpend. 900 % ISO 527-3
Tipo di estrusione cast - -
Spessore del provino 0.05 mm -
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film
Caratteristiche
Termosaldatura
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo 1935/2004/EG, Approvato per l'utilizzo per contatto con alimenti 10/2011, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Applicazioni
Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.