Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Armlen® PP MF 25-2TS - PP-MF25 - R&P Polyplastic

Material Data Center offers the following functions for Armlen® PP MF 25-2TS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Armlen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 10 g/10min ISO 1133
Temperatura 250 °C -
Carico 2.16 kg -
Ritiro di stampaggio, parallelo 0.9 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.9 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a trazione 33 MPa ISO 527
Deformazione a rottura 22 % ISO 527
Resistenza all'urto Charpy, +23°C 60 kJ/m² ISO 179/1eU
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 162 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 72 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 126 °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 70 E-6/K ISO 11359-1/-2
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1060 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Temperatura di fusione 230 °C -
Temperatura dello stampo 60 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche
Stabilità termica
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.