Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC S 1800 - UP-(MD+GF)65 - Polynt S.p.A.

Material Data Center offers the following functions for BMC S 1800:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.1 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza all'urto Charpy, +23°C 60 kJ/m² ISO 179/1eU
Durezza Rockwell M 80 - ISO 2039-2
Other Standards[S]
Modulo a flessione, 23°C 9000 MPa ISO 14125A
Resistenza alla flessione 120 MPa ISO 14125A
S: These properties are reported by the producer according standards that are different to our defaults.
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica 1E12 Ohm*m IEC 62631-3-1
Resistività superficiale 1E14 Ohm IEC 62631-3-2
Res. Alle correnti striscianti superficiali 600 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.2 % Sim. alla ISO 62
Massa volumica 1750 kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Stampaggio a compressione
Forma fisica disponibile
Stampaggio in massa
Caratteristiche speciali
Alto urto o modificato all'urto
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.