Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Baystar™ Lumicene® mPE M6410 EP - (PE-HD) - Bayport Polymers LLC

Material Data Center offers the following functions for Baystar™ Lumicene® mPE M6410 EP:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Baystar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film)
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 1.2 g/10min ASTM D 1238
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
Temperatura di fusione 134 °C ASTM D 3418
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Brillantezza 36 - ASTM D 2457
Opacità 24 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Densità 956 kg/m³ ASTM D 792
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione a rottura, lung. 32.4 MPa ASTM D 882
Resistenza alla trazione a rottura, tras. 32.4 MPa ASTM D 882
Allungamento a rottura, lung. 900 % ASTM D 882
Allungamento a rottura, tras. 1100 % ASTM D 882
Tipo di estrusione blown - -
Spessore del provino 0.0508 mm -
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film
Caratteristiche speciali
Trasparente
Caratteristiche
Proprietà di barriera
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.