Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bio-Flex® F 2110 - (PLA+Copolyester)... - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Bio-Flex® F 2110:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Bio-Flex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Proprietà Meccaniche (Film) - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
more information can be found in the following table
Rilsamid® Chemical Resistance
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 3.7 g/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 730 MPa ISO 527
Resistenza a trazione 20 MPa ISO 527
Deformazione a snervamento 300 % ISO 527
Modulo a flessione, 23°C 680 MPa ISO 178
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 83 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 152 °C ISO 11357-1/-3
Temp.di rammollimento Vicat, A 78 °C ISO 306
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1270 kg/m³ ISO 1183
Biobased content 30 % -
Moisture Content 0.2 % -
Bulk density 770 kg/m³ -
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Modulo a trazione, parallelo 1030 MPa ISO 527-3
Modulo a trazione, perpend. 310 MPa ISO 527-3
Allungamento allo snervamento, parallelo 2.7 % ISO 527-3
Allungamento allo snervamento, perpend. 460 % ISO 527-3
Carico unitario a rottura, parallelo 45 MPa ISO 527-3
Carico unitario a rottura, perpend. 33 MPa ISO 527-3
Allungamento massimo, parallelo 270 % ISO 527-3
Allungamento massimo, perpend. 460 % ISO 527-3
WVTR, 23°C/85%r.h. 130 g/(m²*d) ISO 15106-1/-2
Permeabilità all' Ossigeno, 23°C/85%r.h. 1450 cm³/(m²*d*bar) ISO 15105-1/-2
Permeabilità al CO2, 23°C/85%r.h. 230 cm³/(m²*d*bar) ISO 15105-1/-2
Tipo di estrusione blown - -
Spessore del provino 0.03 mm -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Type of extrusion blown - -
Pre-essiccamento - Temperatura 60 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Umidità del Processo ≤0.3 % -
Temperatura di fusione <190 °C -
Temperatura - Zona di Alimentazione 40 - 60 °C -
Zona 1 160 °C -
Zona 2 170 °C -
Zona 3 170 °C -
Zona 4 170 °C -
Temperatura dell ugello 175 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla, Estrusione Film
Forma fisica disponibile
Pellet, Bianco
Caratteristiche speciali
Translucent
Certifications
Contiene risorse rinnovabili, Biodegradabile, Contatto con gli alimenti, Compostabile ISO 13432 (Produttore), Compostabile ISO 13432 (Certificato)
Applicazioni
Imballaggio, Giocattoli
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.