Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Borstar® ME6053 - (PE-MD) - Borealis A/S

Material Data Center offers the following functions for Borstar® ME6053:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Borstar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 0.7 g/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 32 MPa ISO 527
Deformazione a rottura 800 % ISO 527
Modulo a flessione, 23°C 600 MPa ISO 178
Durezza Shore D 54 - ISO 7619-1
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Rigidità dielettrica 20 kV/mm IEC 60243-1
Altre ProprietàValoreUnitáNorma del test
Massa volumica 936 kg/m³ ISO 1183
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Type of extrusion wire/cable - -
Pre-essiccamento - Temperatura 90 °C -
Temperatura di fusione 180 - 190 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione cavi, Altre Estrusioni
Forma fisica disponibile
Colore naturale
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni
Caratteristiche
Resistente ai graffi, Stabilità termica
Resistenza Chimica
Resistenza alla rottura da stress ambientale, Resistenza all’olio
Applicazioni
Elettrotecnica ed electrici
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.