Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Decal® 937 - PF-X - Raschig GmbH

Material Data Center offers the following functions for Decal® 937:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Decal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
For more detailed information, please read our
or contact our representatives in your region.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.4 % ISO 294-4, 2577
Conduttività termica del fuso 0.5 W/(m K) -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 6000 MPa ISO 527
Resistenza a trazione 30 MPa ISO 527
Modulo a flessione, 23°C 11500 MPa ISO 178
Resistenza all'urto Charpy, +23°C 3 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 2.5 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 200 °C ISO 75-1/-2
Temp.di inflessione sotto caricor, 8.00 MPa 180 °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 12.5 E-6/K ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm V-0 class IEC 60695-11-10
Spessore provato 1.5 mm -
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Costante dielettrica relativa, 100Hz 7 - IEC 62631-2-1
Costante dielettrica relativa, 1MHz 5 - IEC 62631-2-1
Fattore di dissipazione, 100Hz 1500 E-4 IEC 62631-2-1
Fattore di dissipazione, 1MHz 150 E-4 IEC 62631-2-1
Resistività volumica 1E11 Ohm*m IEC 62631-3-1
Resistività superficiale 1E11 Ohm IEC 62631-3-2
Rigidità dielettrica 25 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 225 - IEC 60112
ASTM Data
Resistenza all’arco 4 s ASTM D 495
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.1 % Sim. alla ISO 62
Massa volumica 1700 kg/m³ ISO 1183
Bulk density 800 kg/m³ -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio a compressione
Forma fisica disponibile
Pellet
Disponibilità geografica
Nord America, Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.