Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraStar™ MN610 - PCTA - Eastman Chemical Co.

Material Data Center offers the following functions for DuraStar™ MN610:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Durastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

DuraStar™ Polymer MN610 Natural polymer has excellent appearance and is nearly water-clear. Benefits include toughness, chemical resistance, and excellent processing characteristics. MN610 has very good toughness as shown by Izod impact resistance. Easy to process, it flows readily and fills intricate molds. This product does not contain a mold release.




Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.004 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1800 MPa ISO 527
Carico unitario a trazione 47 MPa ISO 527
Deformazione a snervamento 4 % ISO 527
Carico unitario a rottura 46 MPa ISO 527
Deformazione a rottura 200 % ISO 527
Modulo a flessione, 23°C 1850 MPa ISO 178
Resistenza alla flessione 65 MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 7.8 kJ/m² ISO 180/1A
Resistenza all'urto Izod con intaglio 4.8 kJ/m² ISO 180/1A
Temperatura -40 °C -
ASTM Data
Resistenza alla trazione di snervamento 47 MPa ASTM D 638
Resistenza alla trazione a rottura 54 MPa ASTM D 638
Allungamento a snervamento 5 % ASTM D 638
Allungamento a rottura 300 % ASTM D 638
Modulo a flessione 2000 MPa ASTM D 790
Durezza Rockwell 103 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 80.1 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 40 J/m ASTM D 256
Temperatura -40 °C -
Resistenza all'urto Izod, 1/8 in N J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 74 °C ASTM D 648
DTUL a 264 psi 65 °C ASTM D 648
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 0.3 % ASTM D 1003
Trasmissione luminosa 91 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Densità 1200 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 70 °C -
Pre-essiccamento - Tempo 3 h -
Temperatura di fusione 230 - 280 °C -
Temperatura dello stampo 15 - 30 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Colore naturale
Caratteristiche speciali
Trasparente
Resistenza Chimica
Resistenza chimica generale
Applicazioni
Medicale
Disponibilità geografica
Nord America, Europa, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.