Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ A150 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ A150:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film)
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

Eastar™ A150 Copolyester is a poly(1,4-cyclohexylene-dimethylene terephthalate/isophthalate). It is produced by reacting terephthalic acid and isophthalic acid with the glycol 1,4-cyclohexanedimethanol. Eastar™ A150 is

intended primarily for extrusion into film and sheeting for packaging applications. It has excellent hydrolytic stability and good heat stability. Eastar™ A150 copolyester is lawful for use in food contact applications under food additive regulations published at 21 CFR 177.1240 by the Federal Food and Drug Administration. Therefore, it is lawful for use as a packaging material for meat or poultry foods prepared under federal inspection of the U.S. Department of Agriculture regulations at 9 CFR 318.7 and 381.147.




Proprietà TermicheValoreUnitáNorma del test
ASTM Data
Temperatura di fusione 261 °C ASTM D 3418
Temperatura di transizione vetrosa 91 °C ASTM E 1356
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Brillantezza 108 - ASTM D 2457
Opacità 0.5 % ASTM D 1003
Trasmissione luminosa 93 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Densità 1200 kg/m³ ASTM D 792
Bulk Density 670 kg/m³ -
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ASTM Data
Modulo a trazione, lung. 1600 MPa ASTM D 882
Modulo a trazione, tras. 1600 MPa ASTM D 882
Resistenza alla trazione di snervamento, lung. 43 MPa ASTM D 882
Resistenza alla trazione di snervamento, tras. 43 MPa ASTM D 882
Resistenza alla trazione a rottura, lung. 56 MPa ASTM D 882
Resistenza alla trazione a rottura, tras. 56 MPa ASTM D 882
Allungamento a snervamento, lung. 5 % ASTM D 882
Allungamento a snervamento, tras. 5 % ASTM D 882
Allungamento a rottura, lung. 250 % ASTM D 882
Allungamento a rottura, tras. 250 % ASTM D 882
Spessore del provino 0.28 mm -
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film, Estrusione di Lastre/Fogli
Caratteristiche speciali
Stabilizzato o stabile al calore, Trasparente
Caratteristiche
Copolimero
Resistenza Chimica
Stabilità idrolitica
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Applicazioni
Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.