Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EVATHENE® UE4003 - EVAC - USI Corporation

Material Data Center offers the following functions for EVATHENE® UE4003:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Evathene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 3 g/10min ASTM D 1238
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione a rottura 7.9 MPa ASTM D 638
Allungamento a rottura 1000 % ASTM D 638
Durezza A Shore 43 - ASTM D 2240
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
Temperatura di fusione 48 °C ASTM D 3418
Altre ProprietàValoreUnitáNorma del test
Densità 967 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione cavi, Stampaggio a compressione
Caratteristiche
Schiumabile, Buona adesione, Copolimero
Disponibilità geografica
Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.