Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Excelloy MX851 - (ABS+PC) - Techno-UMG Co., Ltd.

Material Data Center offers the following functions for Excelloy MX851:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Excelloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 37 g/10min ISO 1133
Temperatura 220 °C -
Carico 10 kg -
Ritiro di stampaggio, parallelo 0.5 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 46 MPa ISO 527
Modulo a flessione, 23°C 2000 MPa ISO 178
Resistenza alla flessione 46 MPa ISO 178
Resistenza all'urto Charpy, +23°C 10 kJ/m² ISO 179/1eU
Durezza Rockwell R 101 - ISO 2039-2
ASTM Data
Resistenza alla trazione 47 MPa ASTM D 638
Modulo a flessione 2350 MPa ASTM D 790
Resistenza alla flessione 74.5 MPa ASTM D 790
Durezza Rockwell R 102 - ASTM D 785
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1080 kg/m³ ISO 1183
Densità 1080 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 - 90 °C -
Pre-essiccamento - Tempo 2 - 5 h -
Temperatura dello stampo 40 - 80 °C -
Zona 1 220 - 270 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni
Applicazioni
Automotive
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.