Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Haiplen H50 X2 - PP - Taro Plast S.p.A.

Material Data Center offers the following functions for Haiplen H50 X2:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Haiplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 10 g/10min ISO 1133
Temperatura 230 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1700 MPa ISO 527
Carico unitario a trazione 25 MPa ISO 527
Deformazione a rottura >50 % ISO 527
Modulo a flessione, 23°C 1500 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 3.2 kJ/m² ISO 179/1eA
ASTM Data
Resistenza all'urto Izod con intaglio, 1/8 in 35 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 25 J/m ASTM D 256
Temperatura -23 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 163 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 65 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 120 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 155 °C ISO 306
Temp.di rammollimento Vicat, B 90 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm V-2 class IEC 60695-11-10
ASTM Data
UL 94 combustibilitá V-2 - UL 94
Spessore testati 3.2 mm -
Indice limite di ossigeno 26 % ASTM D 2863
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.03 % Sim. alla ISO 62
Massa volumica 960 kg/m³ ISO 1183
Caratteristiche
Caratteristiche speciali
Ritardante di fiamma, Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore
Caratteristiche
Adatti alla marcatura laser, Basso odore, Omopolimero
Applicazioni
Automotive, Elettrotecnica ed electrici
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.