Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOPELEN SJ-150 - PP - Lotte Chemical Corporation

Material Data Center offers the following functions for HOPELEN SJ-150:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hopelen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 10 g/10min ISO 1133
ASTM Data
Indice di fluidità a caldo, MFI 10 g/10min ASTM D 1238
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a trazione 32 MPa ISO 527
Deformazione a rottura 100 % ISO 527
Modulo a flessione, 23°C 1180 MPa ISO 178
ASTM Data
Resistenza alla trazione di snervamento 34 MPa ASTM D 638
Allungamento a rottura 100 % ASTM D 638
Modulo a flessione 1470 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 34 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 25 J/m ASTM D 256
Temperatura -10 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 0.45 MPa 85 °C ISO 75-1/-2
ASTM Data
UL 94 combustibilitá HB - UL 94
DTUL a 66 psi 105 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Massa volumica 900 kg/m³ ISO 1183
Densità 900 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche
Stabilità termica, Omopolimero
Applicazioni
Polivalente
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.