Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOSTAFORM® MT®24F01 - POM - Celanese

Material Data Center offers the following functions for HOSTAFORM® MT®24F01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostaform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Funzioni
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 21 cm³/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2600 MPa ISO 527
Carico unitario a trazione 58 MPa ISO 527
Deformazione a snervamento 8 % ISO 527
Deformazione nominale a rottura 25 % ISO 527
Resistenza all'urto Charpy, +23°C 80 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 4 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 100 °C ISO 75-1/-2
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1440 kg/m³ ISO 1183
Funzioni
Sforzi-deformazione , HOSTAFORM® MT®24F01, POM, Celanese
Modulo secante-deformazione , HOSTAFORM® MT®24F01, POM, Celanese
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Additivi
Lubrificanti, Agente di distacco
Caratteristiche speciali
Sterilizzabile, Sterilizzazione ad ossido di etilene (EtO), Sterilizzazione a vapore
Caratteristiche
Copolimero
Certifications
Contatto con gli alimenti, Approvazione per contatto con gli alimenti BfR, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR, Grado medico, Biocompatibility ISO 10993, Approvazione della USP class VI, Drug Master File, Device Master File
Applicazioni
Medicale
Disponibilità geografica
Nord America, Europa, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.