Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® FH16 - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® FH16:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film)
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 7 cm³/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 80 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Biobased content 40 % -
Moisture Content 0.5 % -
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Modulo a trazione, parallelo 750 MPa ISO 527-3
Carico allo snervamento, parallelo 15 MPa ISO 527-3
Allungamento allo snervamento, parallelo 5 % ISO 527-3
Carico unitario a rottura, parallelo 25 MPa ISO 527-3
Allungamento massimo, parallelo 250 % ISO 527-3
Resistenza alla lacerazione Trouser, parallel 50 N/mm ISO 6383-1
Spessore del provino 0.02 mm -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla, Estrusione Film
Certifications
Contiene risorse rinnovabili, Biodegradabile, Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti 10/2011, Compostabile ISO 13432 (Produttore), Compostabile ISO 13432 (Certificato)
Disponibilità geografica
Europa, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.