Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F58 AL40 - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F58 AL40:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
more information can be found in the following table
Rilsamid® Chemical Resistance
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 970 MPa ISO 527
Resistenza a trazione 13 MPa ISO 527
Deformazione a rottura 20 % ISO 527
Modulo a flessione, 23°C 900 MPa ISO 178
Resistenza alla flessione 30 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 2 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 115 °C ISO 11357-1/-3
Altre ProprietàValoreUnitáNorma del test
Moisture Content 0.5 % -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione fibra , Estrusione Profilati, Termoformatura
Caratteristiche
Amorfo
Certifications
Contiene risorse rinnovabili, Biodegradabile, Contatto con gli alimenti, Compostabile ISO 13432 (Produttore), Compostabile ISO 13432 (Certificato)
Disponibilità geografica
Europa, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.