Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ 1330G - PA66-GF... - Asahi Kasei

Material Data Center offers the following functions for LEONA™ 1330G:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 9800 / 6700 MPa ISO 527
Carico unitario a rottura 144 / 107 MPa ISO 527
Deformazione a rottura 4 / 6 % ISO 527
Modulo a flessione, 23°C 8700 / 6000 MPa ISO 178
Resistenza alla flessione 235 / 165 MPa ISO 178
Resistenza all'urto Charpy, +23°C 71 / 78 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 10 / 13 kJ/m² ISO 179/1eA
Durezza Rockwell R 120 - ISO 2039-2
ASTM Data
Resistenza alla trazione 157 / 118 MPa ASTM D 638
Allungamento a rottura 3 / 3 % ASTM D 638
Modulo a flessione 8000 / 6300 MPa ASTM D 790
Resistenza alla flessione 245 / 177 MPa ASTM D 790
Durezza Rockwell M 89 / M 60 - ASTM D 785
Taber abrasione resistenza 9 mg/1000 cycles ASTM D 1044
Resistenza all'urto Izod con intaglio, 1/8 in 98 / 118 J/m ASTM D 256
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 246 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 261 / * °C ISO 75-1/-2
Reazione al fuoco a spessore h HB / * class IEC 60695-11-10
Spessore provato 0.8 / * mm -
Yellow Card disponibile sì / * - -
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 0.75 mm -
coefficiente d’espansione termica, lung. 30 E-6/K ASTM D 696
DTUL a 66 psi 260 °C ASTM D 648
DTUL a 264 psi 248 °C ASTM D 648
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'umidità 1.4 / * % Sim. alla ISO 62
Massa volumica 1480 / - kg/m³ ISO 1183
Densità 1480 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 - 90 °C -
Pre-essiccamento - Tempo 2 - 3 h -
Temperatura di fusione 275 - 295 °C -
Temperatura dello stampo 75 - 85 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Additivi
Lubrificanti
Caratteristiche
Grado tribologico
Applicazioni
Automotive
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.