Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ 1502 - PA66 - Asahi Kasei

Material Data Center offers the following functions for LEONA™ 1502:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 2900 / 1000 MPa ISO 527
Carico unitario a trazione 84 / 51 MPa ISO 527
Deformazione a snervamento 4.5 / 26 % ISO 527
Deformazione a rottura - / 100 % ISO 527
Modulo a flessione, 23°C 2700 / 900 MPa ISO 178
Resistenza alla flessione 110 / 39 MPa ISO 178
Resistenza all'urto Charpy, +23°C N / N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 5 / 30 kJ/m² ISO 179/1eA
Durezza Rockwell R 120 - ISO 2039-2
ASTM Data
Resistenza alla trazione 79 / 57 MPa ASTM D 638
Allungamento a rottura 80 / 270 % ASTM D 638
Modulo a flessione 2800 / 1200 MPa ASTM D 790
Resistenza alla flessione 118 / 54 MPa ASTM D 790
Durezza Rockwell M 80 / M 55 - ASTM D 785
Taber abrasione resistenza 5 mg/1000 cycles ASTM D 1044
Resistenza all'urto Izod con intaglio, 1/8 in 49 / 180 J/m ASTM D 256
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 65 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 195 / * °C ISO 75-1/-2
ASTM Data
coefficiente d’espansione termica, lung. 80 E-6/K ASTM D 696
DTUL a 66 psi 230 °C ASTM D 648
DTUL a 264 psi 70 °C ASTM D 648
Conduttività termica, stato solido 0.0288 W/(m K) ASTM C 177
Temperatura specifica 1670 J/(kg K) ASTM C 351
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Resistività volumica 1E13 / - Ohm*m IEC 62631-3-1
Rigidità dielettrica 20 / - kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 525 / - - IEC 60112
ASTM Data
Rigidità elettrica, breve periodo di tempo 20 / - kV/mm ASTM D 149
Resistenza di volume 1E15 / - Ohm*cm ASTM D 257
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'umidità 2.5 / * % Sim. alla ISO 62
Massa volumica 1140 / - kg/m³ ISO 1183
Densità 1140 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione di Lastre/Fogli
Caratteristiche speciali
Stabilizzato o stabile al calore
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.