Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ FH772 - PA66-GF - Asahi Kasei

Material Data Center offers the following functions for LEONA™ FH772:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 9800 / 6700 MPa ISO 527
Carico unitario a rottura 136 / 94 MPa ISO 527
Deformazione a rottura 3 / 5 % ISO 527
Modulo a flessione, 23°C 9600 / 6600 MPa ISO 178
Resistenza alla flessione 209 / 154 MPa ISO 178
Resistenza all'urto Charpy, +23°C 58 / 58 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 8 / 10 kJ/m² ISO 179/1eA
ASTM Data
Resistenza alla trazione 150 / - MPa ASTM D 638
Allungamento a rottura 2.3 / - % ASTM D 638
Modulo a flessione 9300 / - MPa ASTM D 790
Resistenza alla flessione 220 / - MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 75 / - J/m ASTM D 256
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 241 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 258 / * °C ISO 75-1/-2
Reazione al fuoco a spessore h V-0 / * class IEC 60695-11-10
Spessore provato 0.8 / * mm -
Yellow Card disponibile sì / * - -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (1) 3 mm -
ASTM Data
UL 94 combustibilitá V-0 - UL 94
Spessore testati 0.75 mm -
coefficiente d’espansione termica, lung. 30 E-6/K ASTM D 696
DTUL a 264 psi 248 °C ASTM D 648
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Res. Alle correnti striscianti superficiali 600 / - - IEC 60112
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'umidità 1.3 / * % Sim. alla ISO 62
Massa volumica 1410 / - kg/m³ ISO 1183
Densità 1410 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Caratteristiche speciali
Ritardante di fiamma
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.