Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY PC 1303EP-22 - PC - LG Chem

Material Data Center offers the following functions for LUPOY PC 1303EP-22:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 22 g/10min ASTM D 1238
Temperatura 300 °C -
Carico 1.2 kg -
Ritiro di stampaggio, parallelo 0.006 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2270 MPa ISO 527
Carico unitario a trazione 63 MPa ISO 527
Deformazione a snervamento 6 % ISO 527
Carico unitario a rottura 60 MPa ISO 527
Deformazione a rottura 90 % ISO 527
Modulo a flessione, 23°C 2410 MPa ISO 178
Resistenza alla flessione 96 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 45 kJ/m² ISO 179/1eA
Resistenza all'urto Izod, +23°C N kJ/m² ISO 180/1U
Resistenza all'urto Izod con intaglio, +23°C 927 kJ/m² ISO 180/1A
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 128 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 142[ann.] °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 146 °C ISO 306
ASTM Data
coefficiente d’espansione termica, lung. 68 E-6/K ASTM D 696
ann.: annealed
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 1.1 % ASTM D 1003
Trasmissione luminosa 89 % ASTM D 1003
Indice di rifrazione 1.59 - ASTM D 542
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 0.15 % ASTM D 570
Assorbimento d’acqua, equilibrio 0.32 % ASTM D 570
Densità 1200 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Additivi
Agente di distacco
Caratteristiche speciali
Alto urto o modificato all'urto, Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore, Trasparente
Applicazioni
Automotive
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.