Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® UT235 M RE - (PC+PET)-T15 - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® UT235 M RE:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Preparazione Provette - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
  • (PC+PET)-blend, 15% mineral filled, easy flow, low coefficient of linear thermal expansion, easy release, injection molding. Molded parts from UT235M having exceptional dimensional stability.
Partially bio-circular grade / Attributed via mass balance (according to ISCC PLUS Standard).
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 43 cm³/10min ISO 1133
Temperatura 270 °C -
Carico 5 kg -
Ritiro di stampaggio, parallelo 0.6 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.6 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 4500 MPa ISO 527
Carico unitario a rottura 67 MPa ISO 527
Deformazione a rottura 4 % ISO 527
Modulo a flessione, 23°C 4650 MPa ISO 178
Resistenza alla flessione 115 MPa ISO 178
Resistenza all'urto Charpy, +23°C 85 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 85 kJ/m² ISO 179/1eU
Resistenza all'urto Izod, +23°C 75 kJ/m² ISO 180/1U
Perforazione-forza massima, +23°C 4500 N ISO 6603-2
Energia di perforazione, +23°C 36 J ISO 6603-2
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 114 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 128 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 139 °C ISO 306
Coeff.di dilatazione termica lin., parallelo 45 E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 45 E-6/K ISO 11359-1/-2
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.4 % Sim. alla ISO 62
Assorbimento d'umidità 0.2 % Sim. alla ISO 62
Massa volumica 1340 kg/m³ ISO 1183
Bulk density 750 kg/m³ -
Preparazione ProvetteValoreUnitáNorma del test
ISO Data
Stamp. ad Iniezione, temp. di fusione 270 °C ISO 294
Stamp. ad Iniezione, temperatura dello stampo 70 °C ISO 294
Stamp. ad Iniezione, velocità media d'iniezione 200 mm/s ISO 294
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 110 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Umidità del Processo ≤0.01 % -
Temperatura di fusione 260 - 280 °C -
Temperatura dello stampo 70 - 80 °C -
Zona 1 220 - 230 °C -
Zona 2 240 - 250 °C -
Zona 3 260 - 270 °C -
Temperatura dell ugello 270 - 280 °C -
Contropressione 5 - 10 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Additivi
Agente di distacco
Certifications
Contiene risorse rinnovabili, ISCC Plus
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.