Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makrolon® LED5902 FR RE - PC - Covestro Deutschland AG

Material Data Center offers the following functions for Makrolon® LED5902 FR RE:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 6 cm³/10min ISO 1133
Temperatura 300 °C -
Carico 1.2 kg -
Ritiro di stampaggio, parallelo 0.7 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.7 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2300 MPa ISO 527
Carico unitario a trazione 66 MPa ISO 527
Deformazione a snervamento 6.2 % ISO 527
Deformazione nominale a rottura >50 % ISO 527
Carico unitario a rottura 60 MPa ISO 527
Deformazione a rottura 60 % ISO 527
Modulo a flessione, 23°C 2400 MPa ISO 178
Resistenza alla flessione 99 MPa ISO 178
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C, 3mm 32 kJ/m² ISO 179/1eA
Resistenza all'urto Izod con intaglio, +23°C 50[1] kJ/m² ISO 180/1A
Perforazione-forza massima, +23°C 5100 N ISO 6603-2
Perforazione-forza massima, -30°C 6100 N ISO 6603-2
Energia di perforazione, +23°C 50 J ISO 6603-2
Energia di perforazione, -30°C 55 J ISO 6603-2
Ball indentation hardness 120 MPa ISO 2039-1
1: 3 mm
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 121 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 136 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 142 °C ISO 306
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
Spessore provato 1.0 mm -
Reazione al fuoco 5V a spess. h 5VA class IEC 60695-11-20
Spessore provato 3.0 mm -
Indice di ossigeno 39 % ISO 4589-1/-2
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (1) 0.75 mm -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (2) 1.5 mm -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (3) 3 mm -
Glow Wire Ignition Temperature (GWIT) 850 °C IEC 60695-2-13
GWIT - thickness tested (1) 0.75 mm -
Glow Wire Ignition Temperature (GWIT) 850 °C IEC 60695-2-13
GWIT - thickness tested (2) 1.5 mm -
Glow Wire Ignition Temperature (GWIT) 850 °C IEC 60695-2-13
GWIT - thickness tested (3) 3 mm -
Proprietà OtticheValoreUnitáNorma del test
ISO Data
Opacità 1 - ISO 14782
Trasmittanza luminosa 89 % ISO 13468-1, -2
Other Standards[S]
Indice di rifrazione 1.58 - ISO 489
S: These properties are reported by the producer according standards that are different to our defaults.
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1200 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 120 °C -
Pre-essiccamento - Tempo 4 h -
Temperatura di fusione 280 - 320 °C -
Temperatura dello stampo 80 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Additivi
Agente di distacco
Caratteristiche speciali
Ritardante di fiamma, Estab. agli U.V. o per applicaz.in esterni, Trasparente
Certifications
Contiene risorse rinnovabili, ISCC Plus
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.