Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Marlex® D139 - (PE-LLD) - Chevron Phillips Chemical Co. LP

Material Data Center offers the following functions for Marlex® D139:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Marlex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film) - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 1 g/10min ASTM D 1238
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Brillantezza 130 - ASTM D 2457
Opacità 4 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Densità 918 kg/m³ ASTM D 792
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento, lung. 12.8 MPa ASTM D 882
Resistenza alla trazione di snervamento, tras. 10 MPa ASTM D 882
Resistenza alla trazione a rottura, lung. 74.5 MPa ASTM D 882
Resistenza alla trazione a rottura, tras. 56.5 MPa ASTM D 882
Allungamento a rottura, lung. 500 % ASTM D 882
Allungamento a rottura, tras. 600 % ASTM D 882
Tipo di estrusione blown - -
Spessore del provino 0.0254 mm -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Type of extrusion blown - -
Temperatura di fusione 204 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla, Estrusione Film
Caratteristiche speciali
Trasparente
Caratteristiche
Termosaldatura, High Gloss, Copolimero, Copolimero di esene
Applicazioni
Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.