Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NYLENE® PAC6-135 - PA666 - Polymeric Resources Corporation

Material Data Center offers the following functions for NYLENE® PAC6-135:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Nylene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Proprietà Specifiche Materiale - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 27 MPa ASTM D 638
Resistenza alla trazione a rottura 95 MPa ASTM D 638
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
Temperatura di fusione 195 °C ASTM D 3418
Altre ProprietàValoreUnitáNorma del test
Densità 1120 kg/m³ ASTM D 792
Proprietà Specifiche MaterialeValoreUnitáNorma del test
ISO Data
Numero di viscosità 237 cm³/g ISO 307, 1157, 1628
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 82 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Temperatura di fusione 288 - 302 °C -
Temperatura - Zona di Alimentazione 260 - 277 °C -
Zona 1 271 - 293 °C -
Zona 2 288 - 302 °C -
Temperatura dell ugello 288 - 302 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film, Estrusione di tubi, Estrusione Profilati
Caratteristiche speciali
Stabilizzato o stabile al calore, Trasparente
Caratteristiche
Proprietà di barriera, Copolimero
Resistenza Chimica
Resistenza chimica generale
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Applicazioni
Imballaggio
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.