Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 2533 SA 01 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Polyether block amide Pebax® 2533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SA grade is specially designed to food uses. Its chemical structure also enables the absorption and the controlled release of volatile molecules (fragrances, oils, insecticides...).


Main applications:

• Flexible injected parts
• Controlled release of volatile molecules (fragrances
• oils
• insecticides
• etc...)
• Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags or 550kg rigid containers) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Proprietà Meccaniche	secco/cond	Unitá	Norma del test
ISO Data
Modulo a trazione	12 / 10	MPa	ISO 527
Carico unitario al 50% di deformazione	3 / 3	MPa	ISO 527
Deformazione a rottura	>50 / >50	%	ISO 527
Carico Unitario al 10% di allungamento	1 / *	MPa	ISO 527
Carico Unitario al 100% di allungamento	4 / *	MPa	ISO 527
Carico Unitario al 300% di allungamento	5 / *	MPa	ISO 527
Carico Unitario a rottura TPE	32 / *	MPa	ISO 527
Allungamento a rottura TPE	>300 / *	%	ISO 527
Durezza Shore A	74 / *	-	ISO 7619-1
Durezza Shore D	22 / *	-	ISO 7619-1

Proprietà Termiche	secco/cond	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	134 / *	°C	ISO 11357-1/-3

Altre Proprietà	secco/cond	Unitá	Norma del test
Assorbimento d'acqua	1.2 / *	%	Sim. alla ISO 62
Assorbimento d'umidità	0.4 / *	%	Sim. alla ISO 62
Massa volumica	1000 / 1000	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Pellet

Additivi

Lubrificanti

Caratteristiche speciali

Stabilizzato o stabile alla luce, Stabilizzato o stabile al calore

Certifications

Contatto con gli alimenti

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Stampaggio ad Iniezione

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 180°C / 210°C / 240°C.
- Typical mold temperature : 10 – 30°C.
- Drying time and temperature (only necessary for bags/containers opened for more than two hours) : 4-8 hours at 55-65°C.  

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.