Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® MV 3000 SP 01 - TPA - ARKEMA

Material Data Center offers the following functions for Pebax® MV 3000 SP 01:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Polyether block Pebax® MV 3000 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.

This SP grade is specifically designed for outdoor application that needs excellent weather resistance properties.


Main applications:
  • Breathable membranes


Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione - / 45 MPa ISO 527
Carico unitario al 50% di deformazione - / 7 MPa ISO 527
Deformazione a rottura - / >50 % ISO 527
Durezza Shore D 35 / * - ISO 7619-1
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 158 / * °C ISO 11357-1/-3
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 28 / * % Sim. alla ISO 62
Assorbimento d'umidità 1 / * % Sim. alla ISO 62
Massa volumica 1020 / 1020 kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film, Altre Estrusioni, Calandratura, Colata
Forma fisica disponibile
Pellet
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Altre Estrusioni

Processing conditions:

- Cast Film - Typical melt temperature : 240 - 250°C.
- Blown Film - Typical melt temperature : 190 - 210°C.
- Coating - Typical melt temperature : 240 - 250°C.
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 70-80°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.