Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Promyde® B730 P - PA6 - Nurel S.A.

Material Data Center offers the following functions for Promyde® B730 P:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Promyde datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 180 / * cm³/10min ISO 1133
Temperatura 275 / * °C -
Carico 5 / * kg -
Ritiro di stampaggio, parallelo 0.2 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 2900 / 1500 MPa ISO 527
Resistenza a trazione 50 / 30 MPa ISO 527
Deformazione a rottura 1.9 / 20 % ISO 527
Modulo a flessione, 23°C 2800 / 1300 MPa ISO 178
Resistenza alla flessione 112 / 60 MPa ISO 178
Resistenza all'urto Charpy, +23°C 139 / N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 6.8 / 40 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 185 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 60 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 60 / * °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 70 / * E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin. , perpend. 100 / * E-6/K ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm V-2 / * class IEC 60695-11-10
Spessore provato 1.5 / * mm -
Glow Wire Flammability Index (GWFI) 800 °C IEC 60695-2-12
GWFI - thickness tested (1) 1.5 mm -
Glow Wire Ignition Temperature (GWIT) 825 °C IEC 60695-2-13
GWIT - thickness tested (1) 1.5 mm -
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 3 % ASTM D 1003
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 9.5 / * % Sim. alla ISO 62
Assorbimento d'umidità 3 / * % Sim. alla ISO 62
Massa volumica 1150 / - kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura <80 °C -
Pre-essiccamento - Tempo 4 - 6 h -
Temperatura di fusione 210 - 290 °C -
Temperatura dello stampo 0 - 80 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Additivi
Lubrificanti
Caratteristiche speciali
Trasparente
Caratteristiche
Copolimero
Resistenza Chimica
Resistenza chimica generale
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.