Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rigidex® HD3930UA - (PE-MD) - INEOS Olefins & Polymers

Material Data Center offers the following functions for Rigidex® HD3930UA:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Rigidex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 3 g/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 790 MPa ISO 527
Carico unitario a trazione 19 MPa ISO 527
Deformazione a rottura 100 % ISO 527
Modulo a flessione, 23°C 800 MPa ISO 178
Resistenza all'urto Charpy, +23°C 80 kJ/m² ISO 179/1eU
Durezza Shore D 62 - ISO 7619-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 127 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 0.45 MPa 67 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 117 °C ISO 306
ASTM Data
Conduttività termica, stato solido 0.0692 W/(m K) ASTM C 177
Temperatura specifica 2300 J/(kg K) ASTM C 351
Altre ProprietàValoreUnitáNorma del test
Massa volumica 939 kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Stampaggio rotazionale
Forma fisica disponibile
Pellet
Caratteristiche speciali
Alto urto o modificato all'urto, Estab. agli U.V. o per applicaz.in esterni
Resistenza Chimica
Resistenza alla rottura da stress ambientale
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.