Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® HT CMNO - PA* - ARKEMA

Material Data Center offers the following functions for Rilsan® HT CMNO:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
PA11/10T,,M,C16-020
Rilsan® HT CMNO  is a polyphthalamide produced from a renewable source.





Main applications:
  • Glass fiber compound for electronic
  • automotive & transportation applications etc
  • Filament

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 10 / * cm³/10min ISO 1133
Temperatura 255 / * °C -
Carico 2.16 / * kg -
Ritiro di stampaggio, parallelo 1.3 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.2 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione - / 2400 MPa ISO 527
Carico unitario a trazione - / 64 MPa ISO 527
Deformazione a snervamento - / 4 % ISO 527
Resistenza all'urto Charpy, +23°C - / 38 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C - / 59 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C - / 6 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C - / 8 kJ/m² ISO 179/1eA
Durezza Shore D 81 / * - ISO 7619-1
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 255 / * °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min 82 / * °C ISO 11357-1/-2
Altre Proprietàsecco/condUnitáNorma del test
Massa volumica 1100 / - kg/m³ ISO 1183
Biobased content 65 % -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione Profilati, Altre Estrusioni
Forma fisica disponibile
Pellet
Certifications
Contiene risorse rinnovabili
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione
Processing conditions :
- Typical  melt temperature (Min / Recommended / Max) : 270°C / 280°C / 300°C.
- Typical  mold  temperature : 80 - 110°C.
- Drying time and temperature (only for bags opened for more than two hours) :  4 - 8 hours  at 100 - 110°C.
Estrusione di Profilati
Processing conditions :
- Typical  melt temperature (Min / Recommended / Max) : 270°C / 280°C / 290°C.
- Drying time and temperature (only for bags opened for more than two hours) :  8 - 12 hours  at 70 °C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.